Usage - VWR RC-10 Digital Mode D'emploi

4. Usage

The apparatus is not splash-proof.
The Chiller can regulate the temperature of the cooling cycle between -10°C and +40°C. RC 10 Basic
is adjusted to a factory-defined temperature of +7°C.
To start the device push the main switch on the front panel (Picture 4), a green lamp being led when
the device is on.
Under normal usage, the temperature fluctuates ± 0.5 Kelvin around the set point .
Photo 4 : Control panel
Display / Command panel
SET Program key
Increase temperature
Decrease temperature
Derivation valve activated
1
Under normal usage, the coolant temperature is shown on the front panel display.
Display of the temperature setpoint
Press the SET key and hold 1 second.
Increase the temperature setpoint
Press the keys SET and simultaneously, the temperature is rising in 0.1°K steps.
VWR RC-10 Digital Chiller 462-0138 VWR RC-10 Duo Chiller 462-0139
ENG
16