VWR RC-10 Digital Mode D'emploi page 15

5. Plug in the chiller. Use the enclosed power cable.
6. Switch on the chiller (switch on the front panel).
7. After the external circuit has been filled up it may be necessary to add further liquid. Please
check the level indicator. Add some coolant if necessary as described above on Line 4.
Photo 1: Drain tap
Photo 4 Filling aperture Duo
Photo 2: Filling aperture Digital
VWR RC-10 Digital Chiller 462-0138 VWR RC-10 Duo Chiller 462-0139
Photo 3: Liquid level indicator
ENG
15