MAINTENANCE
Please disConneCt the PoweR
CoRd BeFoRe CleaninG
Use a vacuum cleaner provided with a
soft brush to remove dust particles.
Clean the body of the device with a soft
cloth slightly moistened and then dry it.
Take care that water or other liquid does
not come into contact with any electrical
parts during cleaning.
do not use thinneRs, alCohol or
otheR CheMiCals.
Air filter
Clean the air filters every 2 weeks. If
the filters are dirty, the efficiency of the
device will be reduced.
Rev 1_10 12 19
Cleaning the filters
Remove the air filter support block by
grasping it manually and pulling it ou-
tward. For cleaning, use hot water (ap-
proximately 40°C) with a small amount
of neutral detergent. Rinse and dry the
filter before reassembly. Never use the
device without its filters.
Fabriqué en Chine
Page 44