Technical Data - BluMill BL-168DL Mode D'emploi

USING THE ICE PACKS
EN
The ice packs can be used to cool and slowly absorb heat from the water and therefore
lower the temperature of the water in the water tank and the temperature of the
surrounding air. When the frozen ice packs are added to the air cooler, it will blow
cooler air.
Put the ice packs in the freezer and remove them when frozen.
•
• Pull out the water tank and place the frozen ice packs in the water tank.
• Each air cooler comes with two ice packs so that you will be able to use it
continuously.

TECHNICAL DATA

Dimensions 30 x 60 x 27,5 cm
Water tank 3.5 liters
Air flow 270 m3/h
CE-certified
6
Engine power 80W
Voltage 220-240V / 50Hz
CLEANING
Cleaning the air filter:
Pull out the plug and remove the holder from the air filter
by hand. Remove the air filter and clean it using a neutral
detergent, a soft brush and fresh water. Then put the air
filter back into the air cooler.
Cleaning the cooling pad:
Pull out the plug and remove the air filter and the cooling
pad from the air cooler. Clean the cooling pad with fresh
water, a detergent and a soft brush. Then put it back into
the air cooler.
IMPORTANT: In order to avoid leaks, the cooling pad
must be installed smoothly.
Cleaning the water tank:
Pull out the plug and remove the water tank. Wipe off
most of the scale from the water tank using a cloth and
some detergent. Clean the water tank with fresh water
and return it to the air cooler.
Cleaning the housing:
Wipe off the housing using a neutral detergent and
a soft cloth.
IMPORTANT: When cleaning the air cooler, pull out
the plug and switch off the power supply. None of the
control panel parts must be immersed in water during
cleaning.
EN
7