Control Panel - BluMill BL-168DL Mode D'emploi

AIR COOLER
EN
1
5 2
6
7
1. Air filter
2. Cooling pad
3. Water pump
4. Back
5.

Control panel

CONTROL PANEL
3
4
4
3
9
8
6. Outlet
7. Casters
8. Water tank
9. Ice pack
1 2
1. On-off switch / High, Mid and Low
•
The air cooler will make a buzzing sound when you plug in the power cord.
•
If you press the Low button, the air cooler will operate at low speed.
•
If you press the Mid button, the air cooler will operate at medium speed.
•
If you press the High button, the air cooler will operate at high speed.
2. Cooler
•
After you have added the ice packs, press the Cooler button and the air will be
cooled.
3. Swing
•
Press the Swing button and the blades will swing to the left and right.
ADDING WATER TO THE WATER TANK
The water tank is located low down at the rear of the air cooler. Pull it out 1/3 and pour
fresh water into it [1].
• Please check the water level on the display when pouring in the water [3].
The water level in the water tank must stay below 'Max' during pouring.
•
The water level must also stay above 'Min' when the air cooler is cooling and
•
humidifying [3].
• Place the frozen ice packs (or ice cubes) in the water tank whenever you want
cooler air [2].
The water level in the water tank must stay below 'Max' after the ice packs (or
ice cubes) have been placed in the water tank.
EN
5