KEY FUNCTION
GENERAL ON SWITCH
ACTIVATION
04 KEY FUNCTION / GENERAL ON SWITCH / ACTIVATION
The various functions are set using 8 backlit keys:
Temp +
is for increasing the set
temperature
Temp -
is for decreasing the
set temperature
Heating / Cooling: for
changing the operation
mode between heating
and cooling
Sets the regulation
ventilation speed
between a minimum
and maximum value to
an entirely automatic
mode
In order to manage the device via the control panel, this must be connected to
the mains electricity.
If a general switch is installed on the power line, this must also be switched on.
-
Turn the device on by activating the general switch
To activate the device
Key
Operation
Press the ON Stand-by key
Select one of the 4 operating
modes by pressing the relative
key.
Night-time operation:
limits ventilation speed
to a contained level and
the set temperature is
adjusted automatically.
Maximum speed
operation: Allows for
the maximum ventilation
speed to be set
ON/Stand-By: for
activating the device or
for putting it in stand-by.
Silent: limits ventilation
speed to a more
contained value
Display
From off to on