Keys Functions - Trevi SICURO 10 Guide De L'utilisateur

2. Connect the USB outlet on the same power supply cable and plug the latter to a standard
wall outlet, the front Led base will be green.
3. Enter the phone turned off inside the base with the keypad facing frontally, the device will
switch on for a few seconds to show the battery icon with charging and the front LED
of the base will turn red.
4. When the battery is fully charged (the icon is no longer moving) the Front led the base
will become green again. At this point you can remove the phone from the base and use
it normally.
You can also charge your phone by plugging it into a USB port of a computer using, simply,
the supplied USB cable.
Notes:
• Use only the Micro USB cable supplied.
• Use only the mains adapter supplied, different power supplies may damage the battery.
• You can use the device even when it is charging, but, for longer life battery, not
recommended for use; Furthermore, using the apparatus, the timing of Charging may
take longer.
• While charging the device can increase in temperature, this does not affect performance
and machine life.
2
3
4
5

5. Keys Functions

1
13
12
11
10
9
8
6 7
14
15
16
32
17
18