Operation; Inserting Tipone ® Repeat Dispenser Tips; Filling Tipone ® Repeat Dispenser Tips - Star Lab RepeatOne Mode D'emploi

3. Operation

3.1. Inserting TipOne
®
Repeat Dispenser Tips
• Slide the filling lever
1
1
down until it stops.
2
• Raise the locking clamp
upward.
2
• Insert the TipOne ®
Repeat tip until it clicks
into position. Ensure
the TipOne Repeat's
®
plunger is fully inserted
into the barrel before
attaching it to the
RepeatOne ® (Fig. 4).
Fig. 4
• Ensure the filling lever is
completely down, and
then lower the locking
clamp to secure the
TipOne
place (Fig. 5).
3.2. Filling TipOne
Repeat Dispenser Tips
Use the following steps
forall sizes of tips. 0.1 ml,
0.5 ml, 1.0 ml, and 2.5 ml
tips may also be used
with a standard 200 µl
pipette tip. Attaching a
tip facilitates filling from
Fig. 5
narrow-necked vessels
or piercing of sealing foil
and also makes dispensing
of small volumes more
® Repeat tip in precise.
• Immerse the tip into the
liquid.
®
• Fill by slowly sliding the
filling lever upward
(Fig. 6).
• Discard the first
pipetting step.
RepeatOne is now ready
®
for operation.
Fig. 6
7
RepeatOne · User Manual ·