General; Design Principle Of Repeatone - Star Lab RepeatOne Mode D'emploi

1. General

RepeatOne is a hand-held device for repetitive pipettings.
®
Up to 48 pipettings of the same sample can be made from
a single filling, resulting in a considerable reduction in time
and expense.
RepeatOne allows the selection of five separate volumes
®
from each TipOne Repeat Dispenser Tip. Eight different
®
TipOne ® Repeat Dispenser Tip sizes provide the most
important volumes from 2 to 5000 µl.
Use only original STARLAB TipOne
to guarantee the pipette's performance.
4
· RepeatOne · User Manual
1
2
3
4
Repeat Dispenser Tips
®
5

1.1. Design Principle of RepeatOne

1 1
2
3
4
5
Fig.1
®
Volume selection dial
To determine the pipetting volume, the dial setting
(1– 5) is multiplied by the minimum pipetting volume
of the TipOne ® Repeat Dispenser Tip.
Pipetting lever
The volume is dispensed by pressing the pipetting
lever down until it stops.
Filling lever
The TipOne Repeat Dispenser Tip is filled by sliding
®
this lever upward.
Locking clamp
The locking clamp secures the TipOne
Dispenser Tip firmly into RepeatOne
®
TipOne Repeat Dispenser Tip
®
(Fig.1)
Repeat
®
.