Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 26
en
►►1. INFORMATION
REGARDING SAFETY

IMPORTANT:

UNDERSTAND
OPERATIONAL MANUAL BEFORE
ASSEMBLING,
OR PERFORMING MAINTENANCE
ON THIS APPLIANCE. INCORRECT
USE OF THE APPLIANCE CAN
CAUSE SERIOUS INJURY. KEEP
THIS
MANUAL FOR
REFERENCE.
IMPORTANT: This appliance is
not suitable for use by persons
(including children) with reduced
physical,
sensory
capacities or with lack of experience
or knowledge unless supervised
by a person responsible for their
safety. Children must be supervised
to make sure they do not play with
the appliance.
►1.1. Fill the appliance tank only
with clean water.
►1.2. Switch off and disconnect the
appliance from the mains before
filling it.
►1.3. Do not move the appliance,
once the tank has been filled.
►1.4. When using the appliance,
comply with all local regulations
and Standard in force.
►1.5. Keep the appliance dry, in
order to avoid electric shocks.
Hands must always be dry.
►1.6. Use only in ventilated and dry
areas.
►1.7. For indoor use only.
►1.8. Power the appliance only with
voltage and frequency as specified
on the data plate.
►1.9. Only use extensions with three
wires appropriately connected to
earth.
Figures and texts of this book are protected by COPYRIGHT.
READ
AND
THIS
COMMISSIONING
FURTHER
and
mental
►1.10. Do not cover the appliance
with paper, cardboard, plastic,
metal
sheets
inflammable material during use,
in order to prevent any risk.
►1.11. The appliance must be used
on a stable and levelled surface, in
order to prevent any risk.
►1.12.
When
disconnect the appliance from the
power plug.
►1.13. Do not block the air vent (rear
side) or the air outlet (front side) of
the appliance.
►1.14. The minimum safety distance
recommended
appliance and walls or other items
is 0,5 m.
►1.15.
When
connected to the mains or running,
it must never be moved, handled,
topped-up
or
maintenance operation.
►1.16. The appliance (power cable
included) must be kept at a suitable
safety distance from heat sources.
►1.17. In any case, the appliance
must be opened and/or repaired by
authorised after-sales centre.
►1.18.
If
the
damaged, it must be replaced by
the technical after-sales centre, in
order to prevent any risk.
►1.19. Rinse the case with clean
water and clean it before using,
after the period during which the
bio cooler was not in use.
►1.20. In the case of improper
operation of the product at the
start, disconnect itfrom the power
supply immediately and contact
service point.
►1.21. Protect the power supply
cord from damage as a result
of movement of the vehicles or
or
any
other
it
is
not
used,
between
the
the
appliance
subject
to
any
power
cable
is
is

Publicité

Table des Matières
loading

Table des Matières