and local standards
(codes) in force with
regard to plumbing
systems
including
back-flow
preven-
tion devices. For this
reason, the plumbing
connections must be
carried out by a qual-
ified technician. The
warranty
expires
the characteristics of
the power supply do
not correspond to the
nameplate data.
• When installing the
device, it is necessary
to use the parts and
materials
supplied
with the device it-
self. Should it be nec-
essary to use other
parts, the installation
engineer
needs
check their suitabil-
ity for use in contact
with water for human
consumption. The in-
staller must Make the
hydraulic
connec-
tions respecting the
rules of hygiene and
water safety to envi-
ronmental protection
in force in the place of
installation. So for the
hydraulic plant con-
tact
an
authorized
technician.
Always
utilise the new hose
supplied for connec-
tion to the water sup-
ply. Old hoses must
not be utilised.
• It is advisable the in-
stallation of a residual
current device (RCD)
having a rated resid-
ual operating current
not exceeding 30 mA.
• In case of installation
in kitchens, connect
if
the
equipotential
conductor to the ter-
minal in the machine
bottom indicated by
the symbol
to
• The
manufacturer
cannot be held re-
sponsible
for
damages
if the system is not
grounded.
• For electrical safety,
this machine requires
a
ground
Contact a technical-
ly certified electrician
who must check that
the line electrical ca-
pacity is adequate
for the maximum ca-
pacity indicated on
E AG L E O N E P R I M A | L I B R E T TO I ST R UZ I O N I - U S E R H A N D B O O K - M A N U E L D 'I N ST R U CTI O N S | 4 0
the unit label.
• There are some ba-
sic rules for the use of
any electrical appli-
ance. In particular:
• Never touch the unit
with wet hands or
feet;
• Never use the unit
with bare feet;
• Never
sion cords in are-
as equipped with
baths or showers;
• Never pull on the
power supply cord
.
to unplug the unit;
• Never
unit exposed to at-
mospheric
(rain, direct sunlight,
etc..);
• Never let children,
unauthorized
sonnel or anyone
who has not read
this manual operate
the unit.
any
• The qualified electri-
incurred
cian must also check
that the section of the
installation's cables is
large enough for the
absorbed power of
system.
the appliance.
• Never use adapters,
multiple jacks or ex-
tension cords. When
such items prove ab-
solutely
call
in
electrician.
• To prevent danger-
ous overheating, it is
advisable to fully ex-
tend the power sup-
ply cord. Never block
the
heat dissipation grills,
in particular those for
the cup warmer.
• The user must nev-
use
exten-
er replace the unit's
power supply cord. If
this cord is damaged,
turn off the unit and
have it replaced by a
professionally quali-
fied technician.
leave
the
• Should it be neces-
sary to replace the
agents
power cord, this re-
placement operation
must only be per-
formed by an author-
per-
ized service centre or
by the manufacturer.
• The device needs to
be supplied with wa-
ter that is suitable for
human
tion and compliant
with the regulations
in force in the place
of
installation engineer
needs
from the owner/man-
ager of the system
that the water com-
plies with the require-
necessary,
ments and standards
a
qualified
stated above.
• For machines con-
intake
and/or
consump-
installation.
The
confirmation