Miele SAB 100 ACCU NOVA Instructions D'utilisation page 9

Removing threads and hairs
^ Cut any threads or hairs that have
become entangled in the brush roller
with a pair of scissors.
The cut pieces will be drawn in by the
suction of the vacuum the next time it is
used.
More stubborn tangles or blockages
can be removed after opening the roller
cover.
Maintenance and Care
^ Loosen the two locking screws on the
underside of the brush with a small
coin, and remove the roller cover.
^ Take out and clean the roller brush
and compartment.
9