Remote Control - dirna Bergstrom Bycool Green Série Manuel De L'utilisateur

DINAMIC 1.2
EN
Remote Control Functions:
1
Unit On / Off
Note: when this Key is pushed, the unit starts in
automatic mode F4.
2
Blower speed control
Note: while the unit is working in automatic mode F4 if the
user press this key,
to manual F0. This allows the user to choose the desired air flow by pushing this key
and the following symbols will appear on the display: V1, V2, V3, V4, V5, V4, V3, V2,
V1.
3
Temperature control
The comfort temperature is controlled by briefly pressing the
ºC)
To release the remote control; with the unit stopped, keep pushed the key
panel. The symbol
push the On/ Off key before 30 seconds and the unit will emit an acoustic signal. In case this
does not happen, this operation will need to be repeated from the beginning.
In order to deactivate remote control, push key
play. Once it stops flashing, push key
or else you will have to repeat the whole operation.

Remote control

the unit will change the working mode
To release the remote control
C
will appear blinking in the display. When this symbol stops blinking,
How to deactivate remote control
of control panel until
on panel. You will have to do it within 30 seconds
10
Air conditioning for vehicles
1
2
keys (15/ 27
from the control
C
flashes on dis-
3