Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
TROUBLESHOOTING
Problem
Compressor does not
start/blows fuses
Compressor runs but does
not inflate
Compressor runs slowly
Wagan Tech and wagan.com are trademarks of Wagan Corporation.
User's Manual—Read before using this equipment
Solution
•
Push the power plug firmly into the DC socket
and twist it back and forth to ensure clean
contact.
•
Check DC socket for dirt and particles. Use a
non-conductive probe to clean the DC socket.
Do not use your fingers or metal.
•
Check vehicle lighter fuse; should be 15 amps
minimum.
•
Be sure the nozzle always touches the core of
the valve stem.
•
Check tire or other item being inflated for
leaks.
•
Check hose for breaks and leaks at fittings.
•
Overheated from excessive use. Shut it off and
let it cool for 30 minutes.
•
Voltage too low. Check condition of battery.
©2020 Wagan Corporation. All Rights Reserved.
4
Publicité
Table des Matières
