Wagan Tech 88 Guide D'utilisation page 3

Compresseur d'air à entraînement direct 12 v
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

CAUTION
Do not overheat the unit! If the compressor is not pumping a steady stream
of air and appears sluggish or if metal fittings get too warm to the touch,
these are indicators that the compressor has been in operation for too long.
Immediately turn off the compressor and allow it to cool for approximately
30 minutes before resuming operation. Never leave compressor unattended
while in use.
Do not over inflate items beyond their needs. Most car tires will inflate
properly between 30 and 35 psi depending upon the tire. Some racing
bicycle tires require pressure in excess of 75 psi. Other bicycle tires may
require substantially lower pressures. This unit is not fitted for high-pressure
tires such as those used on large commercial trucks.
Keep out of reach of children.
OPERATION
1. To achieve optimal performance, your vehicle's engine should be running
when operating your air compressor.
2. Insert the DC plug into the 12V cigarette lighter socket of your vehicle.
3. For vehicle tires: Unlock thumb latch of air nozzle by moving to vertical
position (see diagram below) and place air nozzle over valve stem of tire.
For other inflatable items: Select the appropriate adaptor and insert it
into the unlocked air nozzle. Lock air nozzle with thumb latch. Tip: When
inflating athletic balls, moisten needle before inserting it into the ball valve.
Wagan Tech and wagan.com are trademarks of Wagan Corporation.
User's Manual—Read before using this equipment
©2020 Wagan Corporation. All Rights Reserved.
2

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

7312

Table des Matières