Wagan Tech 88 Guide D'utilisation page 4

12V Direct Drive Air Compressor 88 by Wagan Tech
4. Push air nozzle down firmly onto valve stem and quickly lock into place by
pressing thumb latch to horizontal position.
5. Set the power switch to the "|" position to start inflation.
NOTE: If your vehicle tire is completely deflated, it is possible that the seal
between the tire and the rim is broken, allowing air to leak out when trying
to inflate. In the event this situation occurs, you will need to jack up your car
prior to inflating the tire.
6. Turn off compressor when desired pressure is reached.
7. Unlock air nozzle and disconnect hose from valve stem.
8. Unplug the power cord from 12V socket.
… WARNING: DO NOT OVERINFLATE PRODUCTS BEYOND THE
MANUFACTURER'S RECOMMENDATIONS.
… WARNING: NEVER LEAVE COMPRESSOR UNATTENDED WHILE IN USE.
Thumb Latch
3
Unlocked Position
www.wagan.com
Air Nozzle
Locked Position
®