Telefunken H39V21 Mode D'emploi page 48

Main menu: Installation, Channel list
Settings menu: Parental, Sources, Network/Internet Settings (if available), More
Teletext
You can enable or prohibit the teletext services(or MHEG if available) by setting this item as 'On' or 'Off'.
Copy To USB (USB cloning)
You can copy the NVRAM data (service list, preferences, etc.) and the welcome image as "hotel_wel.png" to
a USB device using this option. Press OK to copy those files from TV to USB.
Copy From USB (USB cloning)
You can copy the NVRAM data (service list, preferences, etc.) and the welcome image from a USB device
using this option. Press OK, select the directory named as "clone_x" and press OK again to copy NVRAM
data files from USB to TV. The welcome image should be named as "hotel_wel.png" and copied into the root
directory of the USB device. After selecting the Copy From USB option and pressing the OK button highlight
the folder which name appears as "." and then press OK in order to copy the welcome image from USB to TV.
Note: USB device, which will be used for USB cloning functions, must be FAT32 formatted.
Wakeup Time Channel
Set the channel, whose time information is to be used for wakeup timer. If this option is set as "0", time information
of the channel which is being watched will be used.
Note: If hotel mode is active, 'Add wake up timer' function will be available in 'Settings/Timers' menu. After
the new timer is saved, the TV will wake up automatically on desired time.
Wakeup Time Volume
Set the wakeup volume value of the TV. This value can't be set as greater than the value in 'Volume Limit'
menu item.
USB Option
Set as 'Off' to disable the USB ports on the TV. You can also set this option as 5V to provide 5 volts power over
USB. In this case it will still not be available to browse the USB content via Media Browser feature of the TV.
Fixed Pic. Mode
Set as 'On' to disable picture setting menus.
Digital Tuner
Set as 'Off' to disable digital channels. When a digital channel is opened from the channel list, "no signal"
message will be displayed and digital channels will not be listed when manual or auto searches are performed.
Multiple RC Support (up to 4)
You can choose one of the predefined remotes or set as 'Off'. You can set the RCU type from 'RCU program
menu'. The shortcut of this menu is BACK-1-2-3-4.
Welcome Screen
Set as 'On' and TV will show a Welcome Screen. The Welcome Screen is an image with resolution of 960 x 540
pixel and png file format. Welcome Screen image can be changed as described in "Copy From USB" section.
Note: The files larger than 50 KB are not supported.
NIT Update
If this option is enabled NIT (Nertwork Information Table) data will be updated automatically.
EPG Enable/Disable
If you enable this option the EPG menu will be accessable while the TV is in Hotel mode.
Front Panel Clock(optional)
If you enable this option the LED Clock on the front panel of the TV (if available) will be functional. Otherwise
it will be kept off.
Reset to Default Values
Highlight this option and press the OK button on the remote to return the TV to default settings.
English - 47 -