Getting To Know Your Camera; Contents Of The Packaging; Important - LEXIBOOK DJ028 Série Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
1. Flashlight
2. Self-timer LED
3. Camera lens
4. Viewfinder
5. LCD screen
6. LED
7. Power/Menu button
8. Strap hole
1 x DJ028 digital camera / 1 x USB cable
1 x hand strap / 1 x installation CD-ROM / 1 x instruction manual
WARNING: All packaging materials, such as tape, plastic sheets, wire ties and tags are not part of
this product and should be discarded for your child's safety.
1. Make sure the camera is off.
2. Slide open the battery door.
3. Insert 2 x LR03/AAA 1,5V
polarity indicated inside the battery compartment.
4. Close the battery compartment.
Note: When the low battery icon
LCD screen, replace the batteries.
Non-rechargeable batteries are not to be recharged. Rechargeable batteries are to be removed
from the product before being charged. Rechargeable batteries are only to be charged under
adult supervision. Different types of batteries or new and used batteries are not to be mixed.
Only batteries of the same or equivalent type as recommended are to be used. Batteries are to
be inserted with the correct polarity. Exhausted batteries are to be removed from the product.
The supply terminals are not to be short circuited. Do not throw batteries into a fire. Remove the
batteries if you are not going to use the product for a long period of time.
10
DJ028seriesIM1182_V04.indb 10

GETTING TO KNOW YOUR CAMERA

9. Left/Play back button
10. Up button
11. Right/Display on or off button
12. Down/Flash button
13. Shutter button
14. Tripod hole (tripod not included)
15. Battery compartment
16. USB connector port

CONTENTS OF THE PACKAGING

INSERTING NEW BATTERIES
type batteries (not included) observing the
displays in the top right-hand corner of the
WARNING
electrostati
again.

Important

Make sure
1. Insert the
2. In the ma
3. Follow th
4. To launc
System re
MB free ha
resolution o
Supported
1. Insert the
2. In the ma
3. Select yo
4. "The MA
and press "
5. Once yo
of your com
6. To start u
camera aut
System re
with Intel®
for program
color), Micr
Note: To en
to register fi
Press and h
beep will so
Note: The c
18/04/2012 4:49 PM

Publicité

Table des Matières
loading

Table des Matières