(7 and 8) with each other. use a rubber
mallet if required.
2. Insert the aluminium supports deep
enough into the ground to ensure they
are firmly and securely fixed.
3. Attach the animal repeller (plug socket
(12) on the underside) to the aluminium
support.
Suspended installation place the device
at the desired height (max. 1.2 m above
ground).
START-UP
Switching on the device:
1. Twist the range dial (2) to adjust the
desired range (between approx. 0.2 to
0.8 m).
2. Twist the frequency dial (3) from 0 to the
desired frequency. A yellow light briefly
lights up in the motion sensor, indicating
the device is now switched on.
Note: The activation period is 4 to 5
seconds.
Switching off the device:
Twist the frequency dial (3) back to level 0.
CLEANING
The device does not require special care.
Wipe the housing clean with a damp cloth.
DECLARATION OF
CONFORMITy
The eu Declaration of conformity can be
requested at the address stated at the end
of this manual.
16
TECHNICAL DATA
Power supply: 3 x 400 mAh 1.2 V ni-mH AA
batteries 1.2 V rechargeable
Detection zone: 60 m²
Range: approx. 0.2 to 8 m (depending on
weather and surroundings)
Detection angle: 110° horizontally
Frequency range: 6 to 28 kHz (sound,
ultrasound)
Maximum sound pressure level:
110 dB
GENERAL INFORMATION
Disposing of packing material:
properly divide the packing
materials. cardboard goes in
the waste paper bin, foil in the
recyclable materials collection bin.
Old appliances:
Applicable in the european union
and other european nations that
run systems for the separate col-
lection of recyclable materials):
old appliances must not be dis-
posed of with domestic waste. should the
device no longer be operational, the user is
obligated by law to drop off old appliances
– separated from domestic waste – at their
municipality's/district's collection centre
or the like. This ensures proper recycling
of old appliances and prevents negative
impact on the environment. This is why
electrical appliances are marked with this
symbol.