Roof Mount; Pole Mount - Victron energy Solar Module Mode D'emploi

Masquer les pouces Voir aussi pour Solar Module:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 29

4.4 Roof mount

When installing a module on a roof or building, ensure that it is securely fastened and cannot fall as a result of wind or snow loads.
Provide adequate ventilation under a module for cooling (10cm minimum air space between module and mounting surface).
When installing module on a roof, ensure that the roof construction is suitable. In addition, any roof penetration required to mount the
module must be properly sealed to prevent leaks.
In some cases, a special support frame may be necessary.
The roof installation of solar modules may affect the fire-proofing of the house construction.
The modules are rated fire Class C, and are suitable for mounting over a class A roof. Do not install modules on a roof or building during
strong winds in case of accidents.

4.5 Pole mount

When installing a module on a pole, choose a pole and module mounting structure that will withstand anticipated winds for the area.
6

Publicité

Table des Matières
loading

Table des Matières