REHASHOP Vita Mode D'emploi page 10

lnstruction manual
Articel No.: KREHA-1001
The product
GB
The walking frame supports the user during
walking. lt can be either used inside the
house, for shopping purposes or on trips.
A major plus factor is the removable basket
as well as the removable tray. There is also
a big seat for frequent rests. Due to the fact
that the walking frame can be folded to save
space, it is very suitable for car transports.
2
8
3
5
1. Seal
2. Handle and brake
3. Protection against accidential folding
4. Cross bracing
5. Fixed back wheel
6. Steerable front wheel
7. Luggage frame
8. Locking lever
9. Tray
10. Basket
10
9 1
10
Mounting of the walking frame
Make sure that all parts are complete before
you start setting up your walking frame step
by step:
1. Remove the entire packaging material as
well as the cardboard between the back
wheels.
2. Unfold the running gear as described
and shown in the category „folding and
unfolding of the walking frame".
3. Place the walking frame in front of you
with the front wheels in the forward
position.
4. Slide the handlebar rod into the crossbar
of the running gear. Make sure that the
handlebar rod has been placed in there
at least 10 cm deep.
4
7
6
5. Set the handlebar rod clockwise an both
sides with the locking lever. Make sure
to adjust it to the right length the user
needs.
6. Bring the end of the locking lever in a
downwards facing position. To do so just
pull the locking lever outwards and then
„Security" or „Max"
Locking lever