Installing The Remote Control; Filling The Water Tank - Duux Beam mini DXHU06 Manuel D'utilisation

Masquer les pouces Voir aussi pour Beam mini DXHU06:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Installing the device and filter
Note: Follow images 2 to 4 for installing the filter.
Unpack the device and remove the packing materials
1
from the device. Store the packing materials for
possible future transportation
A: Lift the top lid of the product.
2
B: Remove the filter.
Remove the plastic seal from the filter
3
A: Remove the transparent cover to place the filter
4
holder inside the water tank.
B: Position the filter holder on the round water outlet.
C: Push and turn the filter to fix and place back the top
covers on the water tank.
Plug de power cord in a wall outlet. You will
5
hear a beep
Press the power button to switch on the
6
device and the display will light up.
2
a.
b.
6
3
4
a.
.....................................................
c.
b.

Installing the remote control

Open the battery hatch by pressing
1
and sliding it backwards
Place the battery according to the
2
instructions inside the hatch with the
correct polarity
Close the lid
3
Please note:
• Only use 1x CR2032 battery
• Different types of batteries or new and used
batteries are not to be mixed
• Exhausted batteries are to be removed from
the remote controller and safely disposed of
• If the remote controller is to be stored unused
for a long period, the batteries should be
removed
• The supply terminals are not to be short-
circuited.

Filling the water tank

Note: Always remove the plug when filling the
water tank. Preferably use clean tap- or distilled
water to prevent bacteria and scale inside the water
tank.
Warning: Only fill with cold or lukewarm water.
Hot or boiling water will damage the device.
Please add water to the water tank before using
the device according to the steps below:
Remove the power plug and take off the lid on
1
the top side;
Fill the water tank with water using a
2
watering can or container (do not exceed the
transparent water inlet cover)
Place back the top cover and make sure it fits
3
properly.
You may now switch on the device.
Please fill here
!
Note: When using the device for the first time,
the water may have a slight smell and discoloration.
This is normal and not harmful for your health.
Tip: We recommend to use distilled water to
prevent the growth of scale inside the water tank.
7

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Beam mini dxhu07

Table des Matières