Trigano PISCINES OSMOSE Notice De Montage Et Guide De Montage page 54

Attach the supports of the cover pieces to the posts of the round sections.
At the bottom, secure the posts to their connecting plate, using 3 bolts; at the top, secure the posts to
their connecting plate, using one single loosely tightened bolt at the centre of the plate.
Fold the connecting plates (rounded part) and upper plates (straight part) over the rails.
It is important to infill (with a layer of fine sand) around the base on the interior of the pool, particularly
along the side of the pool.
It prevents the liner from sliding under the sheet metal, and protects it from the salient parts of the
structure of the pool that might puncture it (in particular, the pressure plates should be completely
covered).
A depth of 8 to 10 cm of sand will be required.
skimmer
Wall
Wand
Wand
Pared
Parete
Paredei
2176
2374
2276
54 - Notice N°123 840 RevB