Explore Scientific RDP1001 Mode D'emploi page 9

3. Press the [ ] or [
Celsius (°C) / Fahrenheit (°F).
ALARM
SETTING/ADJUSTING DUAL ALARM TIME
You can set one alarm time for weekdays, (Monday
to Friday / 1-5) and one alarm time for the weekend
(Saturday to Sunday / 6-7).
Alarm 1 = Weekday alarm (1-5)
Alarm 2 = Weekend alarm (6-7)
1. Press and hold [ ] button, enter alarm setting.
2. Sequence of setting: Alarm 1 (1-5) weekday hour 
weekday minute  Alarm 2 (6-7) weekend hour 
weekend minute  exit
3. During setting, the setting parameter will flash.
4. Press [ ] button once to increase by 1 or press
[ ] once to decrease by 1. Alternatively press
and hold the [
rapidly.
5. Press [ ] button to confirm setting and enter to next
parameter.
6. Press [ ] button to turn on/off alarm.
] button to switch
] button to change the figures
7. The alarm will sound when the alarm setting is
finished and turned on.
8. If there is no action in 20 seconds, the setting will be
saved and will exit the setting mode.
TURN ON/OFF ALARM
1. Press the [ ] button once to turn on/off the
alarm that is nearest in time. (1-5) or (6-7) will flash
to indicate which alarm was activated.
How to activate alarm times individually:
2. Press [ ] button once to switch to alarm mode.
Monday to Friday alarm time will be shown and (1-5)
will flash.
3. Press [ ] button once to turn on/off Monday
to Friday alarm.
4. Press [ ] button again to show Saturday to Sunday
alarm time. (6-7) will flash.
5. Press [ ] once to turn on/off Saturday to
Sunday alarm.
OPERATION
1. At the set time, alarm signal rings.
EN
IT
DE
FR
ES
NL
9