Changing Of The Settings During The Game - DGT 960 Manuel D'utilisation

appear in the display. The clock will continue in the
'count up' mode. A
display.
Game timer count-up option
If you set the reflection time for both players on
0:00, then both times will at once switch to the
'count up' mode. After the clock is started, the time
used by each player is recorded. A
appear in the display. Then no flag is shown in the
display.
Game timer + delay
This mode is the same as the ' Game Timer' mode.
But each time the clock is pressed, the count down
of the player to move is only activated after the
delay time has been used up.
Please note: When a player has used up all his
time, the flag appears. The clock does not switch to
the 'count up' mode.
Game timer + bonus
This mode is the same as the 'Game Timer' mode.
But each time the clock is pressed, the remaining
reflection time of the player is increased with the
bonus time.
Please note: When a player has used up all his
time, the flag appears. The clock does not switch to
the 'count up' mode.
9. Changing of the settings
during the game
You may change the settings of the DGT960 during a
game. Interrupt the operation of the time controls by
pressing the central Start/ Stop button
and/or the button through the display until the
triangles around the setting you wish to change are
blinking. Press on the
desired time or the desired time control mode appears in
the display. Please note: When you change the reflection
time in which the hours and minutes are shown, the
seconds digits of this time-mode will automatically switch
to zero, without you being able to notice.
Restart now the proceedings of the game by pressing the
central Start/ Stop button
6
sign will appear in the
. Move with the
and/or the button until the
.
sign will