LCD for coordinated operation control
The built-in CPU controls operation of the unit, including
the PLL circuit function. The LCD shows the current
channel number/frequency, the residual battery power, AF
output level and RF input level.
An accumulated operation time indication is also provided for
simple control of the time of battery use (in one-minute
increments).
Saved channel setting
The unit stores the channel setting when it is turned off. The
saved settings are retained even if the batteries are removed.
Therefore, when using the unit next time, you need not
make the same settings again.
Wide dynamic range
The compander (compressor/expander) system enables
stable reception over a wide dynamic range.
Output monitoring
The audio output can be monitored through headphones
(either of stereo or monaural). The monitoring level is
adjustable.
Muting switch for noise elimination
Precautions
•
The unit is designed for use in ambient temperature range
of 0°C to 50°C (32°F to 122°F).
•
Do not place the unit on or near heat sources, such as
lighting equipment, power amplifiers, or in a place subject
to direct sunlight or excessive moisture. In such places,
the external finish or internal parts of the unit may be
damaged.
•
If the unit is used in a very humid or dusty place or in a
place subject to an active or corrasive gas, clean its
surface as well as the connectors with a dry, soft cloth
soon after use.
Lengthy use of the unit in such places or not cleaning it
after its use in such places may shorten its life.
•
When cleaning the unit, never use organic solvents such
as thinners or benzine, which will damage the finish of the
unit.
•
The unit has been factory adjusted precisely. Do not
tamper with its internal parts or attempt to repair it.
3
(GB)