Night Mode Aut - ELMECO QK 1 Manuel D'utilisation Et De Maintenance

5. To exit the menu, press the
If no button is pressed on the electronic panel, after a short time, it automatically exit the menu.
The application Defrost described cannot be used in Hong Kong in according with rules. The Quickream machine
has to be empty and sanitized daily.
The "NIGHT MODE" is useful to keep the product liquid with a temperature lower than 0°C/32°F, when the restaurant or
café is closed or if requested by the user. This mode can be manual, by setting "NIGHT MODE MAN" as illustrated at
page 27, or automatic, by setting the ON and OFF hours. In this case, the machine will automatically switch from "SOFT
MODE" to "NIGHT MODE AUT" and viceversa. In "NIGHT MODE AUT" or "NIGHT MODE MAN" the speed of the augers is
20rpm.The "ON" hour indicates the time in which the machine switches from "SOFT MODE" to "NIGHT MODE AUT",
while the "OFF" hour indicates the time in which the machine switches from "NIGHT MODE AUT" to "SOFT MODE". This
mode is used when you want the product to be ready at a certain time. Before setting the "NIGHT MODE" hour, it is
important to set the date and time of the restaurant or café where it is installed with the following procedure:
1. Press the button on the electronic control panel to view the menu entries
2. Press the or
3. By pressing the
4. Set the correct date, if necessary, with the
button in order to move the cursor horizontally. The date will have the following format: DD/MM/YY
5. After setting the date, press the
6. Press the or
7. If you press the
8. Set the correct time, if necessary, using the
button in order to move the cursor horizontally. Time will be displayed with the following format: HH/MM
9. After setting the time, press the
10. To exit the menu press the
It is now possible to set the ON and OFF hours of the "NIGHT MODE". See the following procedure:
1. Press the button on the electronic control panel to view the menu entries
2. Press the or
button and then the

Night Mode AUT

buttons until you reach the DATE screen
> DATE
button, you can see the date set on the electronic control panel
DATE
button
buttons until you reach the TIME screen
> TIME
button, the time set in the electronic control panel is displayed
TIME
button
button
buttons until you reach the NIGHT MODE screen
button
17/01/12
or buttons, in order to increase or decrease the values and the
11:43
or buttons, in order to increase or decrease the value and the
- 30 -