AEG ST 500 Mode D'emploi page 22

22
▪
never create a short circuit or bridge on the inputs and outputs of the power inverter using foreign objects. Only use
protective contact plugs or spade connectors to connect external appliances to the output sockets.
▪
do not attempt to disassemble or repair the device. Immediately have the device repaired or replaced by a specialty
shop if defective.
▪
do not cover the device as it may be damaged from extreme heating.
▪
Immediately stop using the device if you notice smoke or an unusual odour.
Risk of injury!
▪
Keep the device's cables away from the steering wheel, gearshift, and gas- and brake pedals. position the device
so as not to hinder you in operating the vehicle.
▪
do not insert objects through the ventilation slots.
▪
please also note the operating instructions of connected devices.