Altec Lansing inMotion iMmini Mode D'emploi page 4

M
IN OTION I
Portable Audio System
Thank you for purchasing this Altec Lansing product. For generations, Altec
Lansing has been first in audio innovation. Today, our line of powered
speakers has received more performance awards than any other brand. In
all kinds of desktop environments, in every price range, Altec Lansing offers
sound of distinction — giving even the most demanding customers the
audio enjoyment they seek. Just listen to this!
Box Contents
• inMotion iMmini portable audio system
• 3.5 mm stereo cable (for secondary input)
• Universal power supply
• Protective cover
• User's guide and quick connect instructions
Placing the inMotion system
Position the inMotion iMmini system on a level surface, preferably close
to you (within three feet). The inMotion iMmini system can be placed close
to video displays such as TVs and computer monitors without distorting
the image.
Making Connections
Warning: Do not insert the speaker system's universal power supply into
a wall outlet until all connections are made. Also, turn off your iPod mini
before docking on the inMotion iMmini system.
To ensure first-time operation as expected, please carefully follow the
connection sequences described below in the order indicated.
The iPod mini can be connected to the inMotion iMmini system via the
docking port, while other audio devices must be connected using the
secondary input jack. These are the only signal input connections that need
to be made. After either of these connections are made, insert the barrel
connector from the universal power supply into the connector marked
on the rear of the inMotion iMmini system. After this connection is
made, insert the universal power supply into a wall outlet. You can now use
your speakers.
Please note, the inMotion iMmini system can also be powered with four
AA batteries (not included). Make sure the batteries are installed as
illustrated in the battery compartments found on the bottom of the
inMotion iMmini system.
M
MINI
Power
AC Power
After your iPod mini is docked on the inMotion iMmini system, plug the
universal power supply into a wall outlet. The speaker system is now ready
to operate.
DC (Battery) Power
Install four AA batteries (not included) into the battery compartments on
the bottom of the inMotion iMmini system (two to each compartment).
Make sure the batteries are installed as illustrated in the battery
compartments. After your iPod mini is docked on the inMotion iMmini
system, the speaker system is ready to operate.
Start Playing
1. Turn on your iPod mini.
2. Turn on the Altec Lansing inMotion iMmini system by sliding the power
switch located on the top/right of the unit
will light next to the button when the power is on. The LED will turn
amber in color to indicate the batteries need to be replaced.
Note: To avoid hearing a popping sound when you turn on your inMotion
iMmini system, always turn on your audio source first.
Auto Power On/Off
The Auto Power On/Off feature is enabled after the inMotion unit is
initially turned on using the power switch. After this initial step, the
inMotion system will shut down automatically within a minute of the audio
signal being turned off (or faster if battery power is running low), and turn
on automatically when it detects an audio signal.
Volume
The volume slider on the top/left of the inMotion iMmini system is the
master volume control for the speaker system. Move the slider to the right
to increase the volume or to the left to decrease the volume.
2
to the right. A green LED