User Manual - SBS Sanremo Mode D'emploi

UK

USER MANUAL

Recharge the battery.
The speaker should be fully charged before use. Use the cable
supplied inserting the MicroUSB into socket 1 and the USB
connector into the USB port of a computer or into a portable
battery charger. Whilst recharging the LED1 glows red. It goes
out once recharge is complete.
Switching on the speaker and pairing it via Bluetooth® on
a smartphone.
Press button "C" for around 3 seconds: the display will
confirm the speaker is switched on and is searching for
Bluetooth®: LED 2 will flash blue at the same time. Now select
the speaker (SANREMO SPEAKER) on the Bluetooth® list
on the smartphone, and listen. The display will confirm the
successful pairing with the smartphone and the LED light will
show blue, without flashing.
Main speaker functions.
Using the buttons on the speaker the various functions can
be selected, both when connected to a Bluetooth® source or
other sources such as TF cards (slot 5), pen drives (slot 3) or
via the 3.5 mini-jack (slot 4).
• Previous track: button A
• Next track: button B
• Play/pause: button C
• Reply and hang up: button C
• Volume + and - : VOL slider
• Microphone: "D"
NB: several functions may not be available when the mini-
jack is in use.
6