Canopy Assembly; Blade Assembly; Light Kit Assembly - HOFFLIGHTS SEYCHELLES Manuel D'installation

SEYCHELLES

CANOPY ASSEMBLY

Fix the 2 screws on the bottom of the
boom and loosen the two screws. Hoist
the canopy onto the hanger. Place the
rounded corner of the slotted hole in the
canopy push upward over loose screws
on the hanger. Rotate canopy lock. Then
tighten screw safe.

BLADE ASSEMBLY

Insert one side of the blade mounting
hole into the direction of the long strip
hole on the main side of the motor. Then
use the blade screw to tighten the blade
pressure plate with the blade.
Note: Tighten blade screws twice a year.
ASSEMBLY WITHOUT LIGHT KIT
Locate slots on metal cover and align with nodules on
inside of motor plate. Gently push up on metal cover
and turn to the RIGHT (clockwise) until it slides comple-
tely into place
housing
Motor
plate
Slots
hofflights.com
INSTALLATION MANUAL
Motor
Nodules
Screw
Canopy
Motor
housing
Blade tablettings
Blade screw

LIGHT KIT ASSEMBLY

If you wish to use the light kit, please purchase light
kit separately.
Connect wire from motor housing to wire from the LED
light kit. Make sure quick connection snap together
completely. Locate slots on LED light kit and align with
nodules on inside of motor plate. Gently push up on
LED light kit and turn to the RIGHT(clockwise) until it
slides completely into place.
Motor plate
Quick connection
Slots
IMH-100 v.01
Hanging
bracket
Screw
Motor
housing
Nodules
19