Clarisonic SMART PROFILE Guide D'utilisation page 14

Masquer les pouces Voir aussi pour SMART PROFILE:

Table des Matières

Les langues disponibles

To change the T-TIMER setting, when using a standard brush head, press and hold the +/- button

for 3 seconds.

To disable audible T-TIMER Beeps (spa mode), while the device is off or in pause mode,

simultaneously press and hold the turbo and +/- buttons for 3 seconds. Momentary T-TIMER

pulses will continue at programmed intervals. Repeat to enable audible T-TIMER beeps.

TURBO FUNCTION

The Turbo button is a convenient way to temporarily increase cleansing power any time during

a cleansing cycle, when deeper cleansing is needed.

To use the Turbo function, while the device is on, press and hold the "turbo" button for as long as desired.

To return to the set speed, release the "turbo" button.

NOTE: Using the Turbo function may deplete battery life faster on the device.

Table des Matières