Illustrated Description; Switching On And Off - stayer VAC2030 Instructions D'emploi

Illustrated description

1 Cable holder
2 Carrying handle
3 Upper aspirator
4 operation mode selector
5 Socket for power tool
6 Wheels
7 accommodations hose
8 suction hose
9 Deposit
10 Close
11 Saco dust collector
12 Pleated filter (HEPA)*
Flexible 13Tubo
Filter sponge 14
15 antistatic Chain
16 Connecting air blowing
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our
accessories program.
Initial Operation
Observe correct mains voltage: The voltage
of the power source must agree with the voltage
specified on the nameplate of the machine.
Equipment marked with 230 V can also be
connected to 220 V.
Antistatic chain
Always connect the static discharge chain 15 the bottom
of the Cuba. This will eliminate 100% the possibility
unpleasant electric shock (cramps) due to accumulation
of static electricity when aspirational in carpets, rugs and
the like.

Switching On and Off

To start the suction cleaner, place operation mode switch
4 (-).
To disconnect the vacuum cleaner, place operation mode
switch 4 Ø.
Operation with remote automatic Switching
-Connect the tool to use to the 5
Place switch 4 to the operation symbol with remote
automatic connection ( = ).
The device is operated automatically to connect the power
tool plugged into the socket Current Rating 5 of the vacuum
cleaner. To avoid consumption peaks the machine starts 4
sec. and after the tool.
Note not exceed the maximum consumption
2000W decision.
ENGLISH
13
To disconnect the vacuum cleaner off the tool
power. The vacuum cleaner is automatically switched off
after approx. 6 seconds.
Tool change
Replace a damaged filter immediately.
Insert new or cleaned folded filter 12 and ensure firm
seating at its base.
Malfunctions
In the case of inadequate vacuuming performance, check
the following:
– Is the vacuum top 3 attached properly?
– Are the extension wands connected firmly?
– Is the container full?
– Is the dust bag 11 full?
– Is the folded filter 12 clogged with dust or sponge
filter 14?
Emptying at regular intervals ensures optimum
vacuuming performance.
If the vacuuming performance is not achieved thereafter,
take the machine to customer service.
Maintenance and service instructions
Maintenance and Cleaning
Before any work on the machine itself, pull the
mains plug.
- Always keep the machine clean.
- Use compressed air or a damp cloth to keep clean the
vacuum cleaner.
- The filters 12 and 14 are cleaned with soap and water.
9
Repair service
Our after-sales service responds to your questions
conceming maintenance and repair ofyour product as well
as spare parts. Exploded views and information on spare
parts can also be found under: info@grupostayer.com
Our customer consultants answer your
conceming best buy, application
productsand accessories.
13
Container
Wipe out the container 9
from time to time with a
commercially available, non-
scouring cleaning agent and
allow to dry.
questions
and adjustment of