Available Documentation - Camille Bauer SINEAX CAM IEC 61850 Instructions D'installation

Available documentation

Installation instructions
CAM61850.PAR-E.V1.01.110830.PDF
CAM61850.MICS.V1.2.090520.PDF
CAM61850_PICS.V1.3.090520. PDF
CAM61850.PIXIT.V1.3.090520. PDF
CAM61850.TICS.V1.1.090520. PDF
SINEAX_CAM-61850_Certificate.pdf
PICS, MICS, PIXIT and TISSUES form the basis for the conformance test according to IEC61850-10.
The present document provides instructions about the installation
of the SINEAX CAM with IEC61850 interface. To provide more
detailed information it also refers to some of the below listed
documents, which are available via included CD or via
http://www.camillebauer.com.
User specific parameterization
Describes the possibilities for the application specific
parameterization of the IEC61850 bus card. The possible
settings via Web interface of the bus card and by means of
manufacturer independent configuration tools is shown.
MICS: Model Implementation Conformance Statement
This specification presents the top-level IEC61850 data model
that has been implemented in the SINEAX CAM. The definitions
of all used Logical Nodes and their components are also
included for completeness.
PICS: Protocol Implementation Conformance Statement
The ACSI conformance statements provide details about the
IEC61850 communication service interface of the SINEAX CAM.
PIXIT: Protocol Implementation eXtra Information for Testing
This document specifies the protocol implementation extra
information for testing of the IEC 61850 interface of the SINEAX
CAM.
TISSUES Implementation Conformance Statement
This document provides a template for the tissues conformance
statement. The tissue conformance statement is required to
perform a conformance test and is referenced on the certificate.
The IEC61850 conformance test certificate for the SINEAX CAM,
issued by KEMA.