M-Audio BX Guide D'utilisation page 8

Multichannel Operation (e.g., 5.1 channel surround)
For mixing or monitoring a multichannel source, you undoubtedly have an external bass
management system and/or you may be sending the LFE (low-frequency effects) channel
directly to the subwoofer with no additional signal redirection. In this scenario, route your
subwoofer's audio signal to either the left or right input on the BX Subwoofer. Also, bypass the
BX Subwoofer's internal crossover by setting its Variable Crossover control to 200 Hz (fully
open).
Note: More information on using a subwoofer for multichannel applications may be found at
dolby.com, dts.com, or thx.com. These websites are examples only and are in no way
associated or affiliated with M-Audio or inMusic Brands, Inc. M-Audio does not guarantee the
performance or availability of these services. The BX Subwoofer is not endorsed, sponsored,
or approved by these companies.
Left-Front
Monitor
Left Surround
Monitor
Center-Front
Monitor
You
8
Audio Interface,
Mixer, etc.
Bass Management
System
Right-Front
Monitor
Right Surround
Monitor