Technical Specifications - GOAL ZERO Yeti 1400 Lithium Mode D'emploi

Technical Specifications

Charge times:
Goal Zero Boulder 50
Goal Zero Boulder 100
Goal Zero Boulder 200 briefcase
Battery:
Cell Chemistry
Pack Capacity
Single Cell Equivalent Capacity
Lifecycles
Shelf-life
Management System
Ports:
USB-A Port (output)
USB-C Port (output)
USB-PD Port (output)
6mm Port (output, 6mm)
12V Car Port (output)
12V Power Pole port (output)
120V AC Inverter (output, pure sine wave)
230V AC Inverter (output, pure sine wave)
UNIVERSAL OR AUSTRALIA (TYPE 1) AC PLUGS
Charging Port (input, 8mm)
Power Pole Charging Port (input)
Expansion Module port
10
56-112 hrs
28-56 hrs
14-28 hrs
Li-ion NMC
1425Wh (10.8V, 132Ah)
396Ah @ 3.6V
500 Cycles to 80% capacity
Charge every 3-6 months
PWM charge controller, low battery protection
5V, up to 2.4A (12W max), regulated
5V, up to 3.0A (15W max), regulated
5V, 12V, 20V, up to 3.0A (60W max), regulated
12V, up to 10A (120W max)
12V, up to 10A (120W max)
12V, up to 20A (240W max)
120VAC 60Hz, 12.5A (1500W, 3000W surge)
230VAC 50Hz, 6.5A (1500W, 3000W surge)
14-22V, up to 10A (120W max)
14-22V, up to 30A (360W max)
Covered port under the lid. To be used with Goal Zero
expansion modules only.
Technical Specifications
WiFi:
RF Certification
Protocols
Frequency Range
General:
Weight
Dimensions
Operating Usage Temp.
Certs
Warranty
FCC/CE/IC/TELEC/KCC/SRRC/NCC
802.11 b/g/n (802.11n up to 150 Mbps)
2.4~2.5 GHz
43.7 lbs (19.8 kg)
10.1 x 15.3 x 10.4 in (25.7 x 38.9 x 26.4 cm)
32-104 F (0-40 C)
12 months
11