Installation And Operating Conditions Of The Appliance; Installation Before Using The Appliance For The First Time - Amica GB 15341 W Notice D'utilisation

INSTALLATION AND OPERATING CONDITIONS OF THE APPLIANCE

Installation before using the applian-
ce for the first time
1. Take the product out of the package, re-
move the scotch tapes protecting the door
and the equipment. The possibly remaining
adhesive stains may be removed with a mild
washing agent.
2. Do not throw away the polystyrene ele-
ments of the packaging. In the case of the
necessity to transport the freezer, pack it in
the polystyrene elements and film, as well
as protect it with a scotch tape.
3. Clean the interior surface of the freezer
and the elements of the equipment with a
washing agent dissolved in lukewarm water,
then wipe it dry.
4. Place the freezer on an even, flat and stable
surface, in dry, aired and shadowy room,
far from the heat sources such as an oven,
cooktop, central heating radiator, central
heating pipe, hot water installation, etc.
Minimal distances from the heat
sources
- from the electric gas and other ovens
- 30 mm,
- from oil or coal fired ovens - 300
mm,
- from in-built ovens - 50 mm
If there is no possibility to ensure the above-
mentioned distances, provide an appropria-
te insulation board.
5. Make sure the appliance is placed in the
horizontal position by screwing in 2 adju-
stable front legs (fig. 2)
2
6. In order to ensure easy opening of the
door, the distance between the side
wall of the appliance (from the side of
the door hinges), and the wall should
amount to: 50 mm.
7. Ensure adequate ventilation of the room
and free air circulation from all sides of
the appliance (fig. 3).
3
The rear wall of the refrigerator, in
particular, the condenser and other
elements of the cooling system may
not contact other elements, which
may damage them, (e.g. central
heating pipe and the water supply
pipe).
44