LENCO DAR-012 Mode D'emploi page 10

Aux in function
Switch the unit on by pressing the "POWER" button.
- Press the "FUNCTION" button until "AUX mode" is shown on the display.
- Now you can play music from other music devices (MP3, CD player, Smartphone etc.)
connected to the RCA aux in connections on the back of the unit.
Bluetooth function
- Press the "FUNCTION" button until "BT mode" is shown on the display.
- If the Lenco DAR-012 has never been paired or cannot find the last paired device, the
display will show "UNCONNECT". This means the unit is in search mode. Please follow
the instructions below to pair your Bluetooth device with the Lenco DAR-012.
- When pairing was successful, the display will show "CONNECTED".
- By pressing the "PAIR/SCAN" button you can PLAY/PAUSE the song.
- Turn the "TUNING" knob to play previous or next song.
- Press and hold the "PAIR/SCAN" button for 3 seconds to pair with another Bluetooth
device
Notes: If your Bluetooth enabled device does not support A2DP profile, it will not play the
music through the speaker, even if paired (linked).
Clock and Alarm Operation
- If the radio is powered off, you can turn on the display light for a few seconds by pressing
any button.
Setting the alarm
- Make sure the radio is turned off. Press and hold the "MENU" button until the hour
indicator starts to blink. You can set the hour by turning the "TUNING" knob and when
you have reached the desired hour time, press the "TUNING" knob to confirm. Now you
can set the minutes by turning the "TUNING" knob again and pressing the "TUNING"
knob to confirm.
After confirming the minutes you may set the alarm sound (BUZZER, DAB or FM) by turning
the "TUNING" knob and confirm by pressing the "TUNING" knob
Setting the time
- Make sure the radio is turned off. Press and hold the "SELECT" button until "Time setup"
is shown on the display. Turn the "TUNING" knob until you see "Set Clock" and select it
by pressing the "TUNING" knob.
You can set the hour by turning the "TUNING" knob and when you have reached the
desired hour time, press the "TUNING" knob to confirm. Now you can set the minutes by
turning the "TUNING" knob again and pressing the "TUNING" knob to confirm.