ADDITIONAL FEATURES
Learn More
Touch the Learn More button to display additional information
about using a cycle or feature, if desired. When you are
finished, touch DONE to return to the previous screen.
Steam
Some cycles, such as Quick Refresh and Enhanced Touch Up,
add a small amount of water to the dryer drum after several
minutes of tumbling with heat. This will help loosen wrinkles and
reduce odors. Steam may also be added as an option with the
Wrinkle Shield feature to help minimize wrinkling.
NOTE: Results may vary depending on fabric. 100% cotton
garments with wrinkle-free finish may yield better results than
those without. Use of a fabric softener sheet is not recommended
with steam cycles as it may cause temporary staining on the
clothes.
Wrinkle Shield
Touch to activate the WRINKLE SHIELD feature. This option
helps keep wrinkles from forming when you cannot unload the
dryer promptly at the end of a cycle.
12
Quick Refresh
Use this cycle to smooth out wrinkles and reduce odor from
loads consisting of one to twelve dry items of wrinkle-free
cotton, cotton-polyester blend, common knits and synthetic
garments to be refreshed by touching the arrow keys up or
down to increase or decrease the number of garments.
Enhanced Touch Up
This cycle is best for touching up clothes that have been left in
the dryer too long. In this cycle, a small amount of water is
sprayed into the dryer drum after several minutes of tumbling
with heat. The dryer will continue to tumble with heat followed
by a brief cool down. The dry time and temperature can be
adjusted for this cycle.
NOTE: Tightly packed loads can lead to poor drying
performance, and may increase wrinkling and tangling.
Static Reduce
By adding the Static Reduce option to a cycle, a small amount
of water is sprayed into the dryer drum after several minutes
of tumbling with heat. This helps reduce static build-up in the
load.