General Cleaning And Tightening; Storage - Maruyama TPP27 Manuel Du Propriétaire/De L'utilisateur

Élagueuse
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

General Cleaning and Tightening

WARNING
POTENTIAL HAZARD
• When engine is running, saw chain is
moving and other parts are moving.
WHAT CAN HAPPEN
• Contact with moving saw chain or other
moving parts could cause serious per-
sonal injury or death.
HOW TO AVOID THE HAZARD
• Always turn off your pruner before
you clean or perform any maintenance
on it.
The MARUYAMA Pruner will provide maximum per-
formance for many, many hours if it is maintained
properly.
Good maintenance includes regular checking of all fas-
teners for correct tightness and cleaning the entire
machine.

Storage

For long term storage of the Pruner:
1.
Empty the fuel tank into a suitable fuel storage
container.
2.
Pump the primer bulb on the carburetor until all
fuel is discharged through the clear fuel return
hose.
3.
Run the engine to remove any fuel that may
remain in the carburetor.
4.
Perform all regular maintenance procedures and
any needed repairs.
5.
Remove the spark plug and squirt a very small
amount of oil into the cylinder.
POTENTIAL HAZARD
• Oil may squirt out of the spark plug
opening when you pull the starter grip.
WHAT CAN HAPPEN
• Oil can cause eye injuries.
HOW TO AVOID THE HAZARD
• Protect your eyes and keep your face
away from the spark plug opening.
6.
Pull the starter grip once.
7.
Slowly pull the starter grip to bring the piston to
the top of the cylinder (TDC).
8.
Reinstall the spark plug.
9.
Store the Pruner in a dry place away from exces-
sive heat, sparks or open flame.
— US-27 —
CAUTION

Publicité

Table des Matières
loading

Table des Matières