Lister Liberty Lithium Mode D'emploi page 12

ENGLISH
substances, handle with care.
en
Overload protection
de
All the power supplies include an
overload protection fuse that will
switch the power off if the blades
fr
become jammed.
it
f If the overload protection fuse has
activated, check the blades for
blockages. Clear any obstructions and
es
replace any damaged blades. Ensure
blades are correctly tensioned and oiled.
pt
f The Lithium Powerpack fuse and
the Mains Adaptor fuse will reset
automatically, clipping can then resume.
nl
f The Vehicle Leads require a standard
replacement 7.5A vehicle fuse.
da
Maintenance
sv
no
Cleaning & Storage
f Wipe the handle with a soft cloth. Use
fi
a brush to remove hair and dirt from the
blades and clipper-head.
f Remove the blades for cleaning. Care
pl
should be taken not to lose the tension
spring. Oil the blades before storage.
hr
f Store in a clean, dry, safe place.
Danger! Electric shock due to
sk
penetration of liquid.
f Do not immerse the appliance in
hu
water, do not allow any liquid to
get inside the appliance.
f Only connect the appliance to the
ro
power supply if it's completely dry.
el
Warning! Injuries and material
damage due to incorrect handling.
ru
f Switch off the appliance and
disconnect from power source
before cleaning it or performing
ar
any maintenance.
12
f It is particularly important to keep
plug and cable clean, dry and in
order at all times.
Caution! Damage from aggressive
chemicals.
f Never use solvents or scouring
agents, as aggressive chemicals
could damage the appliance and
accessories.
f Only wipe the appliance with a
soft, slightly damp cloth.
Servicing and repairs
If the cutting performance
deteriorates, the blades should be
re-sharpened or replaced.
Accessories and spare parts are
available from your dealer or our
service centre.
The Lithium Powerpack contains no
servicable parts.
f After every 100 hours use, remove the
clipper-head (Fig. 5) and wipe away
hair and used grease from the gear
wheel. Check for wear and broken teeth.
Re-coat the gears with clean grease (R2
or equivalent). Refit clipper-head before
operating.
Danger of explosion or fire!
f Never attempt to replace the
Lithium battery cells. Do not
post or ship a faulty Lithium
Powerpack.
Disposal
Handle with care! Environmental
damage in the event of incorrect
disposal.
f Correct disposal will ensure
environmental protection and
prevent any potentially harmful