Cleaning And Maintenance - Perel E305DC Mode D'emploi

 no need to make changes to the domestic installation, simply install
between the wall socket and the device (lamp, radio)
5. Overview
Refer to the illustrations on page 2 of this manual.
1 mains plug
2 operating mode
3 selector
6. Operation
1. Select the operating mode [2]:
ON – Time Switch: the connected device is switched on after the
o
set time has elapsed.
OFF – Countdown: the connected device is switched off after the
o
set time has elapsed.
2. Select the time lapse with the selector [3].
3. Plug the timer [1] into the mains socket.
4. Plug the consumer device into the input socket [4].
5. Start the timer by pushing the on-off button [6]. The control LED [5]
will flash (time switch function) or light (countdown function).
Notes
 The timer can be stopped at any time by pressing the on-off button.
 Pressing the on-off button a third time, will restart the timer with its
function.
 Moving the selector while the timer is active will increase or decrease
the set time automatically.

7. Cleaning and Maintenance

 This device does not require any particular maintenance. However,
cleaning it regularly will keep it clean.
Wipe with a dry cloth.
o
Do not use harsh chemicals, cleaning solvents or strong detergents
o
to clean the timer.
 Before cleaning, unplug the timer completely from the mains.
V. 02 – 16/07/2015
E305DC/E305DC-G
4
5
6
5
input socket
control LED
on-off button
©Velleman nv