Connection - Velleman 8021 Mode D'emploi

Connection

CONNECTION
Connect the amplifier inputs to the different sources. Use good quality audio leads.
Respect the Left and Right channels. Connect the output to a suitable stereo power
amplifier or two mono amplifiers (e.g. our 4020, 4040, or 2x 8010) .
Connect the power-cord to the mains connector. Check for correct mains voltage.
(*1) At first time power up, or after a mains voltage failure, the +6dB LED will lit
together with the standby/mute LED.
(*2) Line level is an source with voltages between 150mV and 2V.
6
1. Mains voltage indication
2. Mains connector and fuse holder,
replace only with indicated ratings!
3. Line output. Connect to your power
amplifier.
4. Monitor output, can be used to con-
nect to the audio record input of
your tape, VCR, MD, CDR... re-
corder.
5. Audio/Video audio input. Use this
input to connect your audio signal
coming from a VCR, DVD, MD,
CDR player/recorder...
6. Tuner input. Use this input to con-
nect your tuner, or other normal line
level (*2) unit.
7. CD input. Connect you CD player or
other line level (*2) unit to this input.
8. Phono or Auxiliary input.
Caution: Never connect a line level
(*2) unit when this input is config-
ured for phono use.
9. Phono ground connection. Connect
this to the ground connection of the
phono.