Cleaning And Care; Washing The Cleaning Cloths - Micromaxx MD 15857 Mode D'emploi

CAUTION!
Surfaces can get damaged. Do not use the floor cleaner
foot without the cleaning cloth or the carpet glider.
Never use on unsealed wood floors. When cleaning heat-sensitive
floors such as linoleum or similar, ensure that they are not exposed
to steam for too long in one place.
Consult a flooring specialist, if necessary, to find out if your floor is
suitable for cleaning with a steam cleaner.
 Set the on/off switch to I to turn on the steam cleaner.
The appliance heats up. After a short while, steam escapes and the steam cleaner is
ready for use.
 Set the strength of the steam output using the steam control.
− clockwise: powerful steam jet,
− anticlockwise: weaker steam jet.
 Set the on/off switch to 0 to turn off the steam cleaner. Unplug the appliance af-
ter use.

8. Cleaning and care

CAUTION!
Live components. There is a risk of electrical shock. Un-
plug the appliance before any cleaning. Do not pull on
the power cord, pull on the plug itself. Never immerse
the steam cleaner in water or any other liquids!
 Remove the water tank and empty it completely and rinse it out after every use.
 Do not use any solvents or caustic/gaseous cleaning agents to clean the appli-
ance's surfaces. Wipe the surface with a damp cloth.
 Remove the accessories (nozzles, brush attachments, etc.).
 Clean the accessories with water containing a little detergent and afterwards
rinse them in clear water. Allow the accessories to dry fully before you use them
again.

8.1. Washing the cleaning cloths

Wash the cleaning cloths in the washing machine at 60 degrees Celsius with similar
colours. Do not use bleach or softeners.
108 of 116