Power Switch - HQ Power PROCD2000 Mode D'emploi

• Use the original packaging if the device is to be transported.
• All modifications of the device are forbidden for safety reasons.
• Only use the device for its intended purpose. All other uses may lead to short circuits, burns, electroshocks,
crash, etc. Using the device in an unauthorised way will void the warranty.
4. Description
a. Main unit

1. POWER SWITCH

Press the power switch to turn the unit on and to switch it off.
2. DISC TRAY
The disc is placed in the tray and the CD will be loaded when the OPEN / CLOSE (3) button is pressed.
3. OPEN / CLOSE
Press to load or eject the disc.
4. AC INPUT
Connect the power cord to an AC wall outlet with proper AC voltage.
5. LINE OUT (output jacks)
Output from each CD player through RCA jacks.
6. CONNECTION PLUGS
The 8-pin connector permits the connection of the main unit to the control unit.
b. Control unit
PROCD2000 2 VELLEMAN