Technical Specifications; Electrical Wiring; Compliance - Caterlite GG566 Guide D'utilisation

UK

Technical Specifications

Model Voltage
GG566 230V, 50Hz
GG567 230V, 50Hz

Electrical Wiring

This appliance is supplied with a 3 pin, moulded, BS1363 plug and lead, with a 13 amp fuse as standard.
The plug is to be connected to a suitable mains socket.
This appliance is wired as follows:
• Live wire (coloured brown) to terminal marked L
• Neutral wire (coloured blue) to terminal marked N
• Earth wire (coloured green/yellow) to terminal marked E
This appliance must be earthed, using a dedicated earthing circuit.
If in doubt consult a qualified electrician.
Electrical isolation points must be kept clear of any obstructions. In the event of any emergency
disconnection being required they must be readily accessible.

Compliance

The WEE logo on this product or its documentation indicates that the product must not be
disposed of as household waste. To help prevent possible harm to human health and/or the
environment, the product must be disposed of in an approved and environmentally safe
recycling process. For further information on how to dispose of this product correctly,
contact the product supplier , or the local authority responsible for waste disposal in your
area.
Caterlite parts have undergone strict product testing in order to comply with
regulatory standards and specifications set by international, independent, and
federal authorities.
Caterlite products have been approved to carry the following symbol:
All rights reserved. No part of these instructions may be produced or transmitted in any form or by any means,
electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of Caterlite.
Every effort is made to ensure all details are correct at the time of going to press, however, Caterlite reserve the
3
Power Current
1500W 6.5A
2500W 10.8A
right to change specifications without notice.
Dimensions
h x w x d (mm)
65 x 250 x 280
65 x 480 x 280
Weight
(kg)
2.1
3.5