Operation; Cleaning, Care & Maintenance; Troubleshooting - Caterlite GG566 Guide D'utilisation

Telephone Helpline: 0845 146 2887 (United Kingdom)

Operation

Note: Before using the appliance for the first time,.wipe the hobs clean with a damp
cloth. This removes any residue that may have built up during transit. Elements may
smoke when new, if this persists please call the supplier
Position the appliance in a suitable location.
1.
Ensure the power setting is set to '0'. Connect to the power supply.
2.
Turn the control knob clockwise to set the power to the desired level. When the boiler ring is heating,
3.
the red indicator is illuminated. When temperature setting is reached red indicator will switch off
Place the pan on the ring.
4.
Note: Double boiling rings have individual power controls, which need to be set for each
ring.
When cooking is complete, remove the pan from the hob and turn the power control to '0'.
5.
Cleaning, Care & Maintenance
• Always switch off the appliance and disconnect from the power supply before cleaning.
• Always allow the appliance to cool before cleaning.
• Use warm, soapy water and a damp cloth for cleaning.
• A Caterlite agent or qualified technician should carry out repairs if required.

Troubleshooting

If your Caterlite appliance develops a fault, please check the following table before making a call to the
Helpline.
Fault
The appliance is not working
The power indicator light is
On but the appliance is not
working
Probable Cause
The unit is not switched on
Plug and lead are damaged
Fuse in the plug has blown
Power supply
Internal wiring fault
Internal wiring fault
Action
Check the unit is plugged in correctly and
switched on
Call Caterlite agent or qualified technician
Replace the plug fuse
Check power supply
Call Caterlite agent or qualified technician
Call Caterlite agent or qualified technician
UK
2