Table Des Matières - VAPamore MR-100 PRIMO Mode D'emploi Et Manuel De L'utilisateur

STEAM CLEANER ASSEMBLY
GO TO VAPAMORE.COM TO SEE THE MR-100 PRIMO INSTRUCTIONAL VIDEO
Fig. 1
Accessory
compartment
Fig. 2
Detail adapter
Fig. 3
Accessories twist lock onto the adapter
Fig. 4
Fig. 5
Fig. 6
The MR-100 Primo accessory compartment houses
the detail adapter, Jet nozzle attachment, dipstick,
clothes / fabric tool, micro fiber pad, cotton pad
and all brushes. Open the accessory compartment
by pulling the accessory cover back, away from the
machine. Remove the desired accessory from
the accessory compartment and close the accessory
cover. (Fig. 1)
The detail adapter MUST BE USED with all accessories.
the detail adapter can be used directly to the steam gun
or to the extension tubes. Attach the detail adapter
by pusing on to the steam gun or extesion tube until the
lock tab clicks in place. (Fig. 2)
The accessories attach directly to the detail adapter
by pushing the accessory straight on the detail adapter
and then twist to lock in place. (Fig. 3)
Do not use excessive pressure on the
accessory tools. Let the steam do the work with light
scrubbing action used on the accessory tool.
STEAM GUN & HOSE
Connect the steam hose to the steam socket on
the front of the steam cleaner. To do this flip down
the dust cover door and push the connector on the
steam hose firmly into the socket until both tabs
click into place. To remove the steam hose, press
in both release tabs located on the left and right side
of the steam hose connector and pull out to release
from the socket. (Fig. 4)
(Fig. 5)