Domo DO9079KR Mode D'emploi page 63

www.domo-elektro.be
CLEANING
1. Remove the plug from the socket before cleaning the appliance.
2. Never immerse the motor unit into water or never keep it under running water.
Clean the motor unit with a soft, damp cloth.
3. Disassemble all the accessories. Be careful with the blades of the blender.
4. Clean all the accessories, rinse them and dry thoroughly. You can also clean the
accessories in the dishwasher, except the blades and the blade assembly of the
blender.
5. Cleaning the blender: pour warm water with a few drops of washing-up liquid
into the blender jar. Close the lid. Connect the blender to the stand mixer and mix
a few times using the pulse function. Remove the blender from the stand mixer,
rinse the jar under running water and let it dry upside-down. To remove more
stubborn stains, screw the blade assembly from the jar to clean it by hand. Be
very careful!
OPTIONAL: VEGETABLE SLICER DO9070KR-V
Turn the device off, and take the plug out of the socket before you add, remove or
clean any accessories.
1. Open the lid at the end of the multifunctional head of the stand mixer: lift the lid
upwards and remove it.
2. The connecting point for accessories can now be seen.
3. Place the vegetable slicer at an angle of 25 ° to the connection point and tighten it
by making a quarter turn clockwise. You hear a click when it is securely fastened.
Your vegetable slicer is now in a perfect vertical position.
4. Push the grater fully into the opening of the vegetable slicer. You can choose
between a slicer, a fine grate and a rough grate.
1
3
63
DO9079KR