Removal Of Calluses; After Treatment - Vitalmaxx BG-F-900 Mode D'emploi

25

Removal of Calluses

For dry application, make sure that there are no cream
or care oil residues on your feet.
1. Connect the device to the mains power via the USB cable
or insert batteries (see the "Power Supply" chapter).
2. Grip the protective cap (1) at the level of the two recesses
on the ring (2) and pull it off.
3. Place the required attachment (8) on the device (see the
"Changing the Attachment" chapter).
4. Slide the On / Off switch (3) to the ON position to switch on
the device. The attachment starts to rotate and the suction
function is activated.
5. Place the rotating attachment against the callus and move
the device back and forth and to the sides. Move the device
slowly and without pressure.
If the device is pressed too fi rmly against the skin, the
attachment will automatically come to a stop to prevent
skin injuries.
6. Switch off the device after use by sliding the On / Off switch
to the OFF position.

After Treatment

1. After treatment, apply cream to the feet so that the skin
becomes soft and tender.
2. Clean the device after each use (see the "Cleaning and
Storage" chapter).
EN